- There are no unexpected duties, tariffs or cross border fees on our products. All pricing is in Canadian dollars and shipped from Canada.
- All products shipped from BuyPhonesOnline.ca come pre-configured and with configuration support; so that you can UNPACK, PLUG-IN, and DIAL.
HELIA recommends 3CX
3CX is an advanced commercial phone system. We have found it to have the best value of any phone system available today and it supports companies from under 10 up to very large national companies. To find out more about 3CX, visit www.Office-Phone-Systems.ca
About the Netgear FS116P ProSafe 16 Port 8 POE Network Switch
The ProSafe FS116P provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The sixteen Fast Ethernet ports can be used for any 10/100 Mbps link and eight of these ports can supply industry-standard IEEE 802.3af power. Advanced auto-sensing algorithm gives power only to 802.3af end devices, so no need to worry about damaging proprietary PoE or non-PoE equipment. In addition, it discontinues the power when PoE devices are disconnected. Easy and reliable, the ProSafe FS116P automatically determines PoE requirements, speed, duplex, and cable type using AutoUplink.
The affordably priced ProSafe FS116P delivers PoE to any small business network that wants to simplify the installation of wireless access points and IP-based surveillance cameras. These devices are optimally installed on a ceiling or high on a wall, away from most electrical outlets. PoE eliminates the requirement for a dedicated electrical outlet to power these devices. This allows for flexibility in situating devices where AC power is difficult to access and lowers installation costs. Compact and flexible, the ProSafe FS116P is ideal for small business network that want to inexpensively use PoE to deploy wireless access points and IP-based network surveillance cameras
Network Ports 16 auto speed-sensing 10/100 Mbps RJ-45 ports Network Protocol and Standards IEEE 802.3i 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.1p priority tags IEEE 802.3x Flow Control IEEE 802.3af DTE Power via MDI Performance Specifications Forwarding modes: Store-and-forward Bandwidth: 3.2 Gbps Network latency: Less than 20 μs for 64-byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission Buffer memory: 96 KB embedded memory per unit Address database size: 1,000 media access control (MAC) addresses per system Addressing: 48-bit MAC address Mean Time Between Failure (MTBF): 116,009 hours (~ 13 years) Acoustic noise: 0 dB Status LEDs System: Power, PoE Maximum Power Per Port: Link, Activity, Speed, PoE Active, PoE Fault Power Supply Total Power Consumption: 72W maximum Total PoE Power Budget: 55W maximum 802.3af power consumption: 55W maximum (ports 1 8) 48V DC, 1.45A (70W max); plug is localized to country of sale Physical Specifications Dimensions (W x D x H): 11.3 x 4.1 x 1.1 in. (287 x 103 x 27 mm) Weight: 0.9 kg (2.0 lb) Environmental Specifications Operating temperature: 32˚ to 104°F (0˚ to 40° C) Storage temperature: 14˚ to 158°F (-10˚ to 70°C) Operating humidity: 90% maximum relative humidity, non-condensing Storage humidity: 95% maximum relative humidity, non-condensing Operating altitude: 10,000 ft (3,000 m) maximum Storage altitude: 10,000 ft (3,000 m) maximum Electromagnetic Emissions CE mark, commercial FCC Part 15 Class A VCCI Class A EN 55022 (CISPR 22), Class A C-Tick, Class A Electromagnetic Immunity EN 55024 Safety CE mark, commercial CE/LVD EN60950 Warranty Switch: NETGEAR Lifetime Warranty † Power supply: NETGEAR 2-year Warranty On Call 24x7, Category 1 PMB0331-100 (US) PMB0331 (non-US) XPressHW, Category 1 PRR0331 Package Contents ProSafe 16-port 10/100 Switch with Power over Ethernet (FS116P) AC Adapter Wall-mount kit Installation guide Warranty/support Information card
Phone System Support Overview
Supported Phone Systems